AT90S8515 |
RFQ for AT90S8515 Required Field |
 |
| Technical/Catalog Information | AT90S8515-4AC |
| Vendor | Atmel |
| Category | Integrated Circuits (ICs) |
| Program Memory Size | 8K x 8 |
| RAM Size | 512 x 8 |
| Number of I /O | 32 |
| Package / Case | 44-TQFP |
| Speed | 4MHz |
| Controller Series | AT90 |
| Oscillator Type | External |
| Packaging | Tray |
| Program Memory Type | FLASH |
| EEPROM Size | 512 x 8 |
| Core Processor | AVR |
| Data Converters | - |
| Core Size | 8-Bit |
| Operating Temperature | 0°C ~ 70°C |
| Connectivity | SPI, UART/USART |
| Peripherals | Brown-out Detect/Reset, POR, PWM, WDT |
| Voltage - Supply (Vcc/Vdd) | 2.7 V ~ 6 V |
| Lead Free Status | Contains Lead |
| RoHS Status | RoHS Non-Compliant |
| Other Names | AT90S8515 4AC AT90S85154AC |
| Product | Manufacturers | Pack | D/C |
| AT90S8515 | - | QFP | - |
Features |
| • AVR - High Performance and Low Power RISC Architecture• 118 Powerful Instructions - Most Single Clock Cycle Execution• 8K bytes of In-System Reprogrammable Flash SPI Serial Interface for Program Downloading Endurance: 1,000 Write/Erase Cycles• 512 bytes EEPROM Endurance: 100,000 Write/Erase Cycles• 512 bytes Internal SRAM• 32 x 8 General Purpose Working Registers• 32 Programmable I/O Lines• Programmable Serial UART• SPI Serial Interface• VCC: 2.7 - 6.0V• Fully Static Operation 0 - 8 MHz 4.0 - 6.0V, 0 - 4 MHz 2.7 - 4.0V• Up to 8 MIPS Throughput at 8 MHz• One 8-Bit Timer/Counter with Separate Prescaler• One 16-Bit Timer/Counter with Separate Prescaler and Compare and Capture Modes• Dual PWM• External and Internal Interrupt Sources• Programmable Watchdog Timer with On-Chip Oscillator• On-Chip Analog Comparator• Low Power Idle and Power Down Modes• Programming Lock for Software Security |
| Operating Temperature .................................... -40°C to +105°C Storage Temperature ....................................... -65°C to +150°C Voltage on any Pin except RESET with respect to Ground ............................................-1.0V to +7.0V Maximum Operating Voltage.................................................... 6.6V I/O Pin Maximum Current ................................................... 40.0 mA Maximum Current VCC and GND........................................ 140.0 mA |
